How to choose the right high pressure hose for high pressure cleaning machine

The cleaning principle of the high pressure cleaning machine is very simple, that is, through the high pressure pump or booster to play high pressure water, through the high pressure pipeline to the nozzle, through the high pressure nozzle to convert the high pressure low velocity water into a low pressure high velocity jet; Then use the strong impact force of high pressure water jet to impact the cleaned object, peel off the dirt and remove it, so as to achieve the purpose of cleaning.

Because the high-pressure water jet of the high-pressure cleaning machine has the combined crushing effect of scouring, wedge splitting, shear, grinding, etc., it can immediately break the scale off and wash away, so as to realize the separation of the scale layer and the pipe wall. It is much faster than the traditional cleaning method, and with the cooperation of cleaning hydraulic support, it can get the goals of good cleaning quality, low cleaning cost, high efficiency, no pollution to the environment, high safety, and wide application range.

In the high pressure cleaning machine, in addition to cleaning the hydraulic support is very important, the high pressure hose used in the machine should also be paid attention to. If used and maintained properly, its use time can be relatively extended to achieve the purpose of saving and reducing costs.

For the high pressure hose selected by the high pressure cleaning machine, its inner diameter must match the caliber required by the high pressure pump. If the inner diameter of the hose selected does not match that specified by the high pressure pump, it will affect the normal use and prematurely damage the high pressure hose.

And in the selection of high pressure pipe, in accordance with the technical parameters of the high pressure pump to determine, according to its parameter requirements, choose the matching pressure of the hose, do not use more than the actual pressure of the operation method, otherwise it will affect the normal life of the high pressure hose. In addition, products with higher pressure can be appropriately selected, so that it is easier to extend its service life.

In addition, the high-pressure hose of the high-pressure cleaning machine must be properly used, maintained and maintained in strict accordance with the relevant rules. When the high pressure cleaning equipment is running, do not twist the hose by hand. If it is necessary to bend due to construction needs, the bending radius should not be too small, and the bending should not be at a small Angle.

During the operation of the high pressure pump machine equipment, the high pressure injection device cannot be repeatedly opened and closed, and the impact damage caused by the frequent operation of sudden opening and sudden closing can be reduced as much as possible. When the ultra-high pressure hose is not used for a long time and does not work, the water inside should be emptied, and the hose should be bent into a roll according to the specified size and placed horizontally.